Summary: The products are mainly nurse stations, treatment tables, medical beds and stainless steel equipment, including electric beds, manual beds, automatic turning beds, medical nursing carts, stainless steel medical equipment cabinets, medical record carts, bedside tables and supporting equipment, etc. The scope of use includes hospitals, welfare institutions, and home care, etc.
Specifications and dimensions
● Length 2250mm, width 1000mm, height 480mm～760mm, bed size: 1920*830mm
Function
● All functional actions can be realized by buttons, a nurse controller is set at the end of the bed, and the handheld controller can be locked.
● Bed lifting height: 480mm～760mm, bed front and back tilt angle: 13°±1° (head low, feet high or feet low, head high). The entire bed surface can be adjusted into a chair-like position.
● The back tilt angle is 0～75±5°, the leg tilt angle is 0～45±5°, and the calf board angle can be adjusted manually.
● Load-bearing weight: ≥200kg; The back bed surface adopts a double-support structure, which is strong and solid. The double support is stamped from cold steel plates to enhance the bearing capacity of the backboard.
● The side is equipped with four PP guardrails with a control switch that can be raised and lowered. When the guardrails are lowered and retracted, they are flush with the bed surface, which can reduce space and facilitate clinical operations.
● There are 4 IV stand sockets on both sides of the bed frame, and 4 drainage urine bag hooks on both sides of the bottom of the bed frame. The IV stand can be placed at the bottom of both sides of the bed frame when not in use.
● A mattress stop bar is installed at the end of the bed surface to prevent the mattress from sliding and shifting when the backboard is raised or lowered. It can also be used as a handle to lift and adjust the angle of the calf bed panel.
Material
● The bed body is made of high-quality carbon steel pipe 60*30*1.5mm, double-beam structure, stable and strong.
● The bed plate is made of high-quality cold-rolled carbon steel plate that is formed by one-time machine punching, and the plate thickness is greater than 1.0mm.
● Streamlined luxury head and foot boards, brand new ABS reinforced plastic material, integrally blow-molded, with information card slots on the outside of the foot board and anti-collision corners, with anti-collision function. Can also be used as a CPR board for emergency use, smooth surface, no odor, no gaps, easy to clean, impact-resistant, non-deformable, fireproof, stable and reliable, with self-locking mechanisms on both sides, easy to operate, metal hooks are used at the connection with the bed body, easy to disassemble and assemble, with locking insurance.
● The movable joint of the back bed board adopts a double-support unloading structure, and the supporting rotating shaft is a high-quality seamless steel pipe Φ32*3.0mm.
● After degreasing and rust removal, the whole bed is coated with double phosphating + electrostatic antibacterial powder, and SGS international standard coating. The bed coating has passed the provincial agency inspection and certification, antibacterial and anti-bacterial, acid and alkali corrosion resistance, and color fading resistance, effectively extending the service life.
Configuration
● Equipped with 24V DC motor system, with multiple electrical certifications such as CE, UL, etc., EMI performance guaranteed, quiet and noiseless operation. Equipped with original storage battery, it can work for 8 hours when the grid power is off.
● Equipped with medical 5-inch center-control casters, which are highly wear-resistant, noiseless, stable and firm, and the foot brake lever can be used to brake and release the casters.
● There is a plexiglass medical record card slot on the outside of the footboard.
● Equipped with a high-quality stainless steel four-hook IV stand with telescopic adjustment that matches the bed.
● Optional under-bed storage rack to match the bed.
● An optional movable dining table is available to match the bed. It is height-adjustable, durable and easy to clean.
● You can choose a tri-fold mattress that is 8 to 12 cm thick and has ventilation holes on both sides of the mattress to match the bed.
● Optional ABS bedside cabinets or plastic steel bedside cabinets, the color of which is coordinated with the overall bed.
