Summary: The nurse station, also known as the nurse workbench, is also called the nurse reception desk or reception desk. It is the large reception desk that everyone sees directly after entering the hospital outpatient door. It represents the image and grade of the hospital or medical institution, and should achieve the concept of intimacy and elegance.
Specification
● Front cabinet 6420*680*750/1200mm
● Left low cabinet 2400*680*750mm
● Right low cabinet 2160*680*750mm
mesa
Made of medical marble (acrylic board, solid physical and chemical board, ceramic panel can also be selected), the material thickness is ≥12mm; material properties: acid and alkali resistant, anti-pollution and non-penetration, no deformation and coloring, seamless and easy to clean, wear-resistant, scratch-resistant, impact-resistant, high temperature resistant, UV-resistant, anti-fouling, fire-resistant, anti-static, as well as flame retardant, non-toxic and other technical characteristics; meets the high environmental hygiene requirements of hospitals.
● The overall cabinet of the nurse station adopts Shanghai "Baosteel" brand secc electrolytic steel plate, the thickness of the skeleton steel plate is ≥1.8mm, and the thickness of the guard plate steel plate is ≥1.0mm. The electrolytic steel plate is an excellent metal material with a smooth and flat surface and is not easy to damage. The electrolytic steel plate is a layer of zinc electrolyzed on the basis of the cold-rolled steel plate. Compared with the cold-rolled steel plate, the electrolytic steel plate has the function of rust prevention and will not rust when exposed to air or water. The foot adopts ≥1.0mm 304 stainless steel foot, which is 23mm indented from the front section of the cabinet and 100mm in height. There is no sense of foot resistance during operation, which conforms to the principles of ergonomics.
Accessories
The guide rail adopts high-quality medical guide rail, which has the functions of smooth, silent, automatic return and anti-overturning. The keyboard frame is made of high-quality electrolytic steel plate.
The surface of the electrolytic steel plate is sprayed with excellent antibacterial epoxy resin electrostatic powder (a copy of the relevant certification document must be provided). The thickness of the powder coating is 60-80um. After high-temperature leveling and curing, the corrosion resistance and impact resistance of the spray coating are higher than the national standard. ● Process: The overall resistance welding process is adopted, and there is no exposed welding point. The cabinet body needs to be fully enclosed on the top plate to strengthen the countertop support. The gap between the front door and the drawer of the cabinet body is between 1.5-2mm. The width of the cabinet body is 2.5cm. It adopts a double-layer door panel design and has reinforcing ribs inside to improve the service life of the door. The door shaft connector is 4.0mm in diameter. The cabinet door and drawer use hidden handles, which are bent into one piece. The surface is sprayed with electrostatic epoxy resin powder, and the color can be determined according to the hospital's requirements. The design has a novel and simple appearance and conforms to the trend of modern medical services.
